Power-one K4601 AC-DC Converter 150 Watt with PFC

About Power-one K4601 AC-DC Converter 150 Watt with PFC:

The K4601 series of AC-DC converters represents a flexible range of power supplies for use in advanced electronic systems. Features include full power factor correction, high efficiency, high reliability, low output voltage noise and excellent dynamic response to load/line changes. The converter inputs are protected against surges and transients occurring at the source lines. An input over and undervoltage lock-out circuitry disables the outputs if the input voltage is outside the specified ranges. Inrush current limitation is included preventing circuit breakers and fuses from being damaged at switch-on.
All outputs are overload, open and short-circuit proof and are protected against overvoltages by means of a built-in suppressor diode. The outputs can be inhibited by a logic signal applied to the connector pin 18. If the inhibit function is not used pin 18 must be connected with pin 14 to enable the outputs.
LED indicators display the status of the converter and allow visual monitoring of the system at any time.
Features:
Input voltage range from 85...255 V AC
1or 2 isolated outputs up to 48 V DC
4 kV AC I/O electric strength test voltage
Universal input voltage range
• Power factor >0.95, harmonics <IEC/EN 61000-3-2
• Input over- and undervoltage lock-out
• Efficient input filter and built-in surge and transient
suppression circuitry
• Fully isolated outputs
• Outputs overload, open- and short-circuit proof
• No derating over entire operating temperature range
Use:
Power for Kathrein 19 zoll Racking 
Power Networks